This is a finger print sensor module with TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the finger print data in the module and can configure it in 1:1 or 1: N mode for identifying the person.The FP module can directly interface with 3v3 or 5v Microcontroller. A level converter (like MAX232) is required for interfacing with PC serial port. Optical biometric fingerprint reader with great features and can be embedded into a variety of end products, such as: access control, attendance, safety deposit box, car door locks Features Integrated image collecting and algorithm chip together, ALL-in-One Fingerprint reader can conduct secondary development, can be embedded into a variety of end products Low power consumption, low cost, small size, excellent performance Professional optical technology, precise module manufacturing techniques Good image processing capabilities, can successfully capture image up to resolution 500 dpi Specifications Fingerprint sensor type: Optical Sensor Life: 100 million times Static indicators: 15KVBacklight: bright green Interface: USB1.1/UART(TTL logical level) RS232 communication baud rate: 4800BPS~115200BPS changeable Dimension: 55*32*21.5mm Image Capture Surface 15—18(mm) Verification Speed: 0.3 sec Scanning Speed: 0.5 sec Character file size: 256 bytes Template size: 512 bytes Storage capacity: 250 Security level: 5 (1,2,3,4,5(highest)) False Acceptance Rate (FAR) :0.0001% False Rejection Rate (FRR): 0.1% Resolution 500 DPI Voltage :3.6-6.0 VDC Working current: Typical 90 mA, Peak 150mA Matching Method: 1: N Operating Environment Temperature: -20 to 45° centigrade
|Finger Print Module R305|
Copyright © 2017 E-Rachit.com . All rights reserved.